Below is a sample of the shade of hide I'm currently cutting straps from. The leather is not dyed and the color will darken over time.
leather sample

Purchase A Strap

I'll need to know your basic length.

  1. Measure your current strap and describe that measurement to me.

    --- OR ---

  2. Hold your instrument in your normal playing position while standing.
  3. Have another person hold a flexible tape measure on (NOT AROUND) the headstock, heel button, or top of the scroll (whichever point you want to fasten to). 
  4. Run the tape measure up around your playing shoulder, and down to the end button.
  5. Banjo measurements should be taken from the bracket bolt closest to the neck to one closest to the tailpiece that you want to fasten to.

All straps can adjust a few inches shorter or longer than the measurement you give me.

I'll also need to know your guitar or mandolin attachment points:

Let me know if the front of the strap will attach to the headstock, heel button, or F-scroll AND if you have a standard or pick-up end button.

SHIPPING BY:
Priority Mail with Delivery Confirmation

"What if I don't like it?"

I don't think this is likely, but if one of my straps doesn't suit you for any reason at all, just email me within 48 hours of delivery and return it in the same condition you received it. I'll return your purchase price, less shipping. Sully

New Instrument Straps

Each of my straps is custom made one at a time using the finest full grain harness leather available.

If you are looking for a beautiful one-of-a-kind strap, check out my current selection of Vintage Instrument Straps.

guitar strap features

GUITAR STRAP - $42.00

1" wide, #1 harness leather strap

Shoulder piece 2" wide by 11.5" long harness leather

Also available with 7/8" wide strap and 1 3/4" wide x 9" long shoulder piece for smaller size guitars

Infinitely adjustable several inches on both ends to the exact length required by the user

banjo straps

BANJO STRAP - $42.00

1" wide, #1 harness leather strap

Shoulder piece 2" wide by 11.5" long harness leather

Also available with 7/8" wide strap and 1 3/4" wide x 9" long shoulder piece for smaller open-back banjos

Infinitely adjustable several inches on both ends to the exact length required by the user

mandolin straps

MANDOLIN SKINNY STRAP - $39.00

1/2" wide, #1 split harness leather strap

Shoulder piece 1 1/4" wide by 8" long split leather

Infinitely adjustable several inches on both ends to the exact length required by the user

dobro_straps

DOBRO STRAP - $52.00

1" wide, #1 harness leather strap

Shoulder piece 2" wide by 15" long harness leather

Infinitely adjustable several inches on the headstock end to the exact length required by the user

Strap & Attachment Options

shoulder piece

SHOULDER PIECE

Included with each strap, the shoulder piece is made with suede lined harness leather to prevent slipping:

Guitar (2" x 11.5") Banjo (2" x 11.5")
Small Guitar or Banjo (1 3/4" x 9") Dobro (2" x 15")
Mandolin Skinny (1 1/4" x 8")  
non-adjustable strap tab

Non-Adjustable Button Holes - No Charge

Optional for no additional charge, I can punch the button holes directly into either the 7/8" wide or 1" wide strap (no button tabs/lacing). I'll need an exact strap length measured hole to hole.

non-adjustable strap tab

Double End Button Tab + $3.00

Fits both standard and pick-up buttons. Holes are about 1 1/4" apart with the pick-up hole on the bottom.
 stitched shoulder piece

Edge Stitching + $12.00

Waxed harness thread edge stitching added to any shoulder piece, hand sewn into hand punched needle holes. Please allow additional time for delivery.